Brand-hydraulics HIGH FLOW NON ADJUSTABLE FLOW DIVIDER (BX50) Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Brand-hydraulics HIGH FLOW NON ADJUSTABLE FLOW DIVIDER (BX50). BRAND Hydraulics HIGH FLOW NON ADJUSTABLE FLOW DIVIDER (BX50) User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
04/14
OUTLET OUTLET
INLET
BRAND HYDRAULICS - OMAHA
3X Ø
17
64
[Ø6.7]
4.50" [114.3]
2.25" [57.2]
2.50" [63.5]
1.87" [47.6]
2.75" [69.9]
3.38" [85.7]
6.75" [171.5]
1.13" [28.6]1.12" [28.6]
BX50-16SAE
HIGH FLOW NON ADJUSTABLE FLOW DIVIDER (BX50)
INSTALLATION & USER GUIDE
SPECIFICATIONS:
Rated for 3000 psi (207 bar).
Rated for 25-45 gpm (94-170 lpm).
30-Micron filtration recommended.
Weight 9 lbs. (4.1 kg).
Standard port sizes.
#16SAE (1-5/16-12) all ports
FEATURES:
Receives single stream, and divides into two streams. The two outlet flows are pressure compensated and the sum of two
flows equal inlet flow.
MOUNTING INSTRUCTIONS:
Mounting – Valve can be mounted in any orientation. Valve must be mounted on a flat surface. Special attention should
be paid to not bend or twist the casting when mounting. Doing so may cause the compensator spool to bind, causing
valve to fail. It is recommended to install washers between casting and mounting surface.
FREQUENTLY ASKED QUESTIONS:
Q: What happens if I block one outlet port?
A: If one outlet port is blocked or plugged for any reason the compensation spool will attempt to compensate for increasing
pressure, and shift thus blocking the other outlet port. This will in turn cause the valve to fail.
DIMENSIONAL DATA:
Vue de la page 0
1 2

Résumé du contenu

Page 1 - DIMENSIONAL DATA:

04/14 OUTLET OUTLETINLETBRAND HYDRAULICS - OMAHA3X Ø1764 [Ø6.7]4.50" [114.3]2.25" [57.2]2.50" [63.5]1.87" [47.6]2.75" [69.9]

Page 2 - SAFETY PRECAUTIONS:

04/14 SAFETY PRECAUTIONS:  It is the purchaser’s responsibility to determine the suitability of any Brand Hydraulics Co. product for an intended a

Commentaires sur ces manuels

Pas de commentaire